The Onyx 200 is great for electric car or boat modelers. With charge rates from 1.5 to 5 amps, it can safely and fully charge batteries ranging from 750mAh "AAA" batteries and nitro receiver packs, to the biggest sub-C NiMH packs – and many things in between! Great for 1/18th to 1/8th scale electrics, nitro receiver packs, and more! A tiny, lightweight built-in switching AC power supply plus DC input capability is perfect for use at home or the track. Easy to see LEDs and audible tones make it easy to track the charge status at any time.
Five LEDs show the status of charge — the more fully charged, more LEDs show. A green LED at the top means the battery has reached peak, and ready to race! Audible tones aid in set-up and use.
Connect 4 or 5 cell NiCd or NiMH receiver batteries with universal connectors directly to a handy charge jack on the front of the charger — great for nitros!
AC input: 110V AC 60Hz
DC input: 11-15V DC, built-in lead with alligator clips
Battery types: 4-7 NiCd or NiMH cells (4.8-8.4V)
Battery capacity range: 750-7500mAh
Fast charge current: 1.5A, 3A, 5A linear (40W maximum)
Fast charge termination: peak detection
Fast charge safety timer: 90 minutes
Peak sensitivity: 8mV
Auto-trickle current: 1/20 fast charge setting, rounded to 50mA (0-250mA)
Controls: pushbutton, slide-switch
LED indicators: 4 red, 1 green
Audible indicators: Indicates start, stop, errors
Output connections: built-in lead with standard connector*
built-in jack for charging 4 or 5 cell Rx packs
Protective devices: solid-state reverse polarity and current overload
Case size: 5.74 x 4.60 x 1.61" (146 x 117 x 41 mm)
Weight: 17.0 oz. (484 g)
*Adapter leads available separately
Adapter - Standard to Deans Ultra Plug male (GPMM3131)
Adapter - Standard to Vendetta, MiniQuake, RS4 Battery (DTXC2210)